Kitchen Cabinet Price Per Foot in Malaysia: How Linear-Foot Pricing Works
Most kitchen cabinet contractors in Malaysia quote by the running foot instead of giving a single lump-sum price. They usually charge one rate for base cabinets and another for wall cabinets. This guide explains typical kitchen cabinet price per foot in Malaysia and shows you how to estimate your cabinet budget before requesting quotations.
Use the per-foot rate as a starting point, not the final project cost. Countertop, sink and hob cut-outs, tall units, wet-kitchen upgrades, hardware, delivery, and installation are often priced separately.
Quick formula: Base cabinet length × base rate + wall cabinet length × wall rate = a rough cabinet cost before adding the countertop, hardware upgrades, delivery, and installation.
Quick price snapshot
Base cabinets: Melamine RM220–RM350/ft • Laminate RM280–RM450/ft • Acrylic RM450–RM700+/ft • Solid wood RM600–RM1,000+/ft. Wall cabinet rates are usually lower.
Kitchen Cabinet Price Per Foot in Malaysia
Kitchen cabinets in Malaysia are usually quoted by running foot rather than as a single lump sum. Contractors normally measure base cabinet runs and wall cabinet runs separately because they differ in construction and material usage.
In our 2026 KL & Selangor contractor pricing study, the median plywood base-cabinet rate was RM500 per foot across 10 fixed-scope quotes.
Typical planning range
Budget-friendly cabinets usually use melamine, while laminate remains the most common mid-range choice. Acrylic and solid wood command premium prices because of their finish quality and manufacturing requirements.
Simple estimate formula
Base cabinet length × base rate + wall cabinet length × wall rate. This gives a rough cabinet cost before adding the countertop, sink cut-outs, accessories, installation, and delivery.
Sample calculation
Using typical laminate cabinet rates, an 8-foot base cabinet and 6-foot wall cabinet run may cost approximately RM3,600–RM5,800 before adding the countertop, sink cut-outs, hardware upgrades, delivery, and installation.
What Affects Kitchen Cabinet Price Per Foot?
Two kitchens with the same cabinet length can receive very different quotations. Besides the cabinet material, contractors also consider board thickness, hardware quality, cabinet height, internal accessories, wet kitchen exposure, installation complexity, and site conditions. When comparing quotations, always compare the overall specification, not just the RM-per-foot rate.
Kitchen Cabinet Price Per Foot by Material
These ranges are intended for early budgeting rather than fixed quotations. Use them to compare a contractor’s RM-per-foot rate before checking what is included in the measurement, hardware, installation and wet-kitchen scope.
| Material | Base Run (per ft) | Wall Run (per ft) | Best For |
|---|---|---|---|
| Melamine | RM220–RM350 | RM180–RM280 | Rental units, budget-conscious kitchens, simple straight runs. |
| Laminate | RM280–RM450 | RM230–RM360 | Most condos and landed kitchens wanting a balance of finish and durability. |
| Acrylic / high-gloss | RM450–RM700+ | RM380–RM550+ | Feature kitchens where a premium finish matters more than cost control. |
| Solid wood / veneer | RM600–RM1,000+ | RM500–RM800+ | Premium dry kitchens prioritising natural texture and warmer tones. |
A lower RM-per-foot rate doesn’t always mean a cheaper kitchen. Two quotations can have identical rates but different totals because of cabinet measurements, hardware quality, countertop choices, tall units, installation scope, and wet kitchen upgrades. Always compare the complete quotation, not just the headline price.
What a Per-Foot Rate Usually Does and Doesn't Cover
A RM350-per-foot quotation isn’t automatically better than one at RM420 per foot. The cheaper quote may exclude premium hinges, installation, or tall units, making the final project cost higher once everything is added.
Usually included
Most per-foot quotations include the cabinet carcass, doors, shelves, and standard hinges. Premium hardware, pull-out storage, lighting, and stone countertops are usually quoted separately.
Often excluded
Premium soft-close systems, drawer organizers, pull-out baskets, quartz or sintered stone countertops, backsplash installation, plumbing and electrical works, delivery, and installation are commonly excluded unless stated otherwise.
Note: The price ranges shown are intended for budgeting only. Actual quotations vary depending on cabinet specifications, board thickness, hardware brands, installation requirements, site conditions, and contractor pricing.
Example Per-Foot Cabinet Calculations
These examples show how base cabinet and wall cabinet pricing combine into a practical estimate. The calculation stays the same, but your kitchen layout and cabinet length can make a big difference to the final cost.
Mont Kiara or Petaling Jaya condo
Using typical laminate cabinet rates, an 8-foot base cabinet and 6-foot wall cabinet run may cost approximately RM3,600–RM5,800 before adding the countertop, sink cut-outs, hardware upgrades, delivery, and installation.
Cheras or Puchong landed wet kitchen
Using typical laminate cabinet rates, a 14-foot base cabinet and 10-foot wall cabinet run may cost approximately RM6,220–RM9,900 before wet-zone upgrades, tall pantry units, countertop, backsplash, and sink or hob cut-outs.
Running feet, not floor area
A cabinet run like this is priced along its length, not the size of the kitchen it sits in — which is why two kitchens of the same square footage can land at very different totals.
How to Estimate Your Own Cabinet Length
A rough length estimate before contacting a contractor helps you sanity-check any quote you receive against the ranges above.
Measure the base run
Measure along the floor where base cabinets will sit, including the section under the sink, in feet.
Measure the wall run
Measure separately along the wall where upper cabinets will sit, which may be shorter than the base run if a window or hood interrupts it.
Note tall units and corners
Mark where a tall pantry unit, corner carousel, or island will sit, since these are usually priced separately from the straight run.
Multiply by the material rate
Multiply the base and wall cabinet lengths by their respective rates to get a rough estimate, then add the cost of the countertop, hardware, and installation.
Why Per-Foot Price Alone Can Be Misleading
A RM350-per-foot quotation isn’t automatically better than one at RM420 per foot. The cheaper quote may exclude premium hinges, installation, or tall units, making the final project cost higher once everything is added.
Different measurement methods
Some contractors measure to the outer cabinet edge, others to the wall — a small difference in method can shift the billed length noticeably.
Hardware tier assumptions
A low headline rate may assume basic hinges and no soft-close, with upgrades priced separately once you ask.
What counts as "in the run"
Some quotes fold corner units and short returns into the run length; others bill them as separate fixed items on top.
Cabinet Length by Property Type
Property type affects how much running length you’re actually pricing, which matters as much as the rate itself.
Condo kitchens
Condo kitchens usually have shorter cabinet runs, helping keep the overall cabinet cost lower even if the per-foot rate is slightly higher.
Landed home kitchens
Often longer runs, sometimes split across wet and dry kitchen zones, so total length can be significantly more than a condo run even at the same rate.
Older kitchen replacement
Uneven walls or shifted plumbing points may require adjustment work that isn't captured in a straightforward per-foot calculation.
Kitchen Cabinet Pricing Across KL & Selangor
Typical cabinet quotation per foot patterns vary by property mix, but the same planning questions come up across the Klang Valley.
Petaling Jaya, Damansara & Subang Jaya condos
Commonly compact, straight-run layouts where homeowners are comparing finish level, hardware, and exact measurement method.
Cheras, Puchong & Klang landed homes
More likely to include wet and dry zones, so the length, material mix, and upgrade list need to be checked separately.
Shah Alam larger family kitchens
Often have longer runs and more storage demand, which can push total cabinet length well beyond a basic condo layout.
Common mistakes include:
Comparing only the RM-per-foot rate instead of the complete quotation.
Assuming countertops are included.
Forgetting that tall pantry units and kitchen islands are often priced separately.
Ignoring hardware upgrades such as premium soft-close hinges.
Not checking how contractors measure cabinet length.
Treating the cabinet quotation as the total kitchen renovation budget.
How My Reno Service Helps With Cabinet Length Estimates
We help homeowners turn rough cabinet measurements into a realistic renovation budget before investing in detailed cabinet drawings.
Simple quote start
Tell us your renovation type, property location, budget, and preferred timeline so we can provide a more realistic starting estimate.
Length-based clarity
Base and wall run lengths are discussed separately so the estimate matches how contractors actually quote.
KL and Selangor context
Typical run lengths and material choices are framed around condos, apartments, and landed homes across the Klang Valley.
Budget-band clarity
Budget bands from below RM20k to RM100k+ help frame whether the estimated length fits a basic, mid-range, or premium build.
Kitchen Cabinet Price Per Foot FAQs
What is kitchen cabinet price per foot?
Price per foot is how most Malaysian cabinet contractors quote base and wall cabinets — a rate multiplied by the running length of the cabinet run, rather than a single lump sum for the whole kitchen. Base and wall runs are usually priced at different rates and measured separately.
How much is kitchen cabinet price per foot in Malaysia?
Melamine typically runs RM220–RM350 per foot, laminate RM280–RM450 per foot, acrylic or high-gloss finishes RM450–RM700+ per foot, and solid wood or veneer RM600–RM1,000+ per foot. Wall cabinet runs are usually priced somewhat lower than base runs of the same material.
Is price per foot the same as total kitchen cabinet cost?
No. Price per foot only covers the cabinet carcass and doors along the measured run. Countertop, sink and hob cut-outs, tall units, islands, hardware upgrades, delivery, and installation are usually priced separately. Compare the kitchen cabinet cost Malaysia guide for total budgeting.
Why do two per-foot quotes with the same rate end up different totals?
The rate is only half the calculation. Differences in measured cabinet length, whether tall units and corner units are included in the run or charged separately, and what hardware is bundled into the rate can produce very different final totals even at the same RM per foot.
Are tall units and islands priced per foot?
Not usually in the same way as base and wall runs. Tall pantry units, corner carousel units, and islands are often quoted as fixed items because their fabrication complexity does not scale linearly with width the way a straight cabinet run does.
Does wet kitchen use change the per-foot rate?
Yes. Cabinets near sinks, floor traps, or heavy cooking zones often need stronger edging, moisture-resistant boards, or aluminium construction, which can push the per-foot rate for that section above the rate used for dry-kitchen runs.
What should I measure before asking for a per-foot quote?
Measure the base cabinet run length and the wall cabinet run length separately, in feet, along the wall the cabinets will sit against. Note where the sink, hob, and any tall units will go, since those sections may be priced differently from a straight run.
Get a Kitchen Cabinet Quote Based on Your Actual Measurements
Tell us your kitchen dimensions, preferred cabinet material, property location, and renovation budget. We’ll help you estimate a realistic cabinet cost and explain what should and shouldn’t be included in a per-foot quotation.